Part Number : TDA8786A

Function : 10-bit Analog-to-digital Interface for CCD cameras.

Package : QFP 48 Pin Type

Maker : Philips Electronics

Pinouts :
TDA8786A datasheet

Description :

The TDA8786, TDA8786A is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC, a soft clipper circuit and a low power 10-bit Analog-to-Digital Converter (ADC) together with its reference voltage regulator.

The AGC and soft clipper circuits are controlled by on-chip DACs via a serial interface.
A 10-bit DAC controls the ADC input clamp level. A pre-blanking function is also included.
An additional DAC is provided for additional system controls; its output voltage range is 1.4 V (p-p) which is available at pin OFDOUT.


1. Correlated Double Sampling (CDS), AGC, soft clipper, pre-blanking, 10-bit ADC and reference regulator included 

2. Fully programmable via a 3-wire serial interface

3. Sampling frequency up to 18 MHz


4. AGC gain from 3.5 to 33.5 dB (in 0.1 dB steps)

Datasheet PDF Download :
TDA8786A pdf

Others datasheet of same file :

TDA8786, TDA8786-A, TDA8786AG/C1, TDA8786AG/C1/R1, TDA8786AG/C2

2021/06/26 10:28 2021/06/26 10:28