Part Number : SN54ABTH245


Package : CFP, LCCC 20 Pin Type

Maker : Texas Instruments

Pinouts :
SN54ABTH245 datasheet

Description : 

These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus,depending on the logic level at the direction-control (DIR) input. The output-enable(OE) input can be used to disable the device so the buses are effectively isolated.

When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. 

This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.


1. State-of-the-Art EPIC-ΙΙB BiCMOS Design
2. Significantly Reduces Power Dissipation
3. Latch-Up Performance Exceeds 500 mA Per JESD 17
4. Typical VOLP(Output Ground Bounce) < 1 V at VCC= 5 V, TA= 25°C
5. Ioff and Power-Up 3-State Support Hot Insertion
6. High-Drive Outputs (–32-mA IOH, 64-mA IOL)
7. Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors

Official Homepage :

Datasheet PDF Download :
SN54ABTH245 pdf

Others datasheet of same file :

SN54ABTH245, SN74ABTH245DBLE, 54ABTH245, SN54ABTH245

2021/03/27 13:52 2021/03/27 13:52