Part Number : ML4812

Function : Power Factor Controller

Package : DIP 16 Pin, PLCC 20 Pin type

Maker : Fairchild Semiconductor

Pinouts :
ML4812 datasheet

Description :

The ML4812 is designed to optimally facilitate a peak current control boost type power factor correction system. Special care has been taken in the design of the ML4812 to
increase system noise immunity. The circuit includes a precision reference, gain modulator, error amplifier, over voltage protection, ramp compensation, as well as a high current output. In addition, start-up is simplified by an under voltage lockout circuit with 6V hysteresis. In a typical application, the ML4812 functions as a current mode regulator. The current which is necessary to terminate the cycle is a product of the sinusoidal line voltage times the output of the error amplifier which is regulating the output DC voltage. Ramp compensation is programmable with an external resistor, to provide stable operation when the duty cycle exceeds 50%.


• Precision buffered 5V reference (±0.5%)
• Current-input gain modulator reduces external components and improves noise immunity
• Programmable ramp compensation circuit
• 1A peak current totem-pole output drive
• Overvoltage comparator helps prevent output voltage “runaway”
• Wide common mode range in current sense comparators for better noise immunity
• Large oscillator amplitude for better noise immunity

Datasheet PDF Download :
ML4812 pdf

Others datasheet of same file : ML-4812, ML4812CP, ML4812CQ


2021/05/26 20:04 2021/05/26 20:04