Part Number : AD8295

Function : Precision Instrumentation Amplifier with Signal Processing Amplifiers

Package : 16 Pin, 4 mm × 4 mm LFCSP Type

Maker : Analog Devices

Pinouts :
AD8295 datasheet

Description :

The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistors.
The AD8295 is designed to make PCB routing easy and efficient. The AD8295 components are arranged in a logical way so that typical application circuits have short routes and few vias. Unlike most chip scale packages, the AD8295 does not have an exposed metal pad on the back of the part, which frees additional space for routing and vias. The logical pin arrange ment and routing freedom enable the AD8295 to offer simple pin-strapped solutions for complex systems in the equivalent board space of a typical MSOP package.


1. Saves board space
2. Includes precision in-amp, 2 op amps, and 2 matched resistors
3. No heat slug for more routing room
4. Differential output fully specified
5. Gain set with 1 external resistor (gain range: 1 to 1000)
6. Input voltage noise: 8 nV/√Hz maximum at 1 kHz
7. Wide power supply range: ±2.3 V to ±18 V
8. 1 ppm/°C, 0.03% resistor matching


1. Industrial process controls
2. Wheatstone bridges
3. Precision data acquisition systems
4. Medical instrumentation
5. Strain gages
6. Transducer interfaces
7. Differential output

Datasheet PDF Download :
AD8295 pdf

Others datasheet of same file :


2021/06/01 10:59 2021/06/01 10:59