Part Number : 74HC4094
Function : 8-stage shift-and-store bus register
Package : SO 16 Pin type
Maker : NXP Semiconductors.
The 74HC4094, 74HCT4094 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (D) and two serial outputs (QS1 and QS2) to enable cascading. Data is shifted on the LOW-to-HIGH transitions of the CP input.
Data is available at QS1 on the LOW-to-HIGH transitions of the CP input to allow cascading when clock edges are fast. The same data is available at QS2 on the next HIGH-to-LOW
transition of the CP input to allow cascading when clock edges are slow. The data in the shift register is transferred to the storage register when the STR input is HIGH. Data in the storage register appears at the outputs whenever the output enable input (OE) is HIGH.
A LOW on OE causes the outputs to assume a high-impedance OFF-state. Operation of the
OE input does not affect the state of the registers. Inputs include clamp diodes. This enables the use of current limiting resistors tointerface inputs to voltages in excess of Vcc.
1. Complies with JEDEC standard JESD7A
2. Input levels:
(1) For 74HC4094: CMOS level
(2) For 74HCT4094: TTL level
3. Low-power dissipation
1. Serial-to-parallel data conversion
2. Remote control holding register
744094, 74HC4094D, 74HC4094DB, 74HC4094N, 74HC4094PW