PDF DRV3203-Q1 Download

Description

The DRV3203-Q1 device is a field-effect transistor (FET) pre-driver designed for three-phase motor control for applications such as an oil pump or a water pump. The device has three high-side pre-FET drivers and three low-side drivers which are under the control of an external MCU. A charge pump supplies the power for the high side, and there is no requirement for a bootstrap capacitor. For commutation, this integrated circuit (IC) sends a conditional motor signal and output to the MCU. Diagnostics provide undervoltage, overvoltage, overcurrent, overtemperature and power-bridge faults. One can measure the motor current using an integrated current-sense amplifier and comparator in a battery common-mode range, which allows the use of the motor current in a high-side current-sense application. External resistors set the gain. One can configure the pre-drivers and other internal settings through the SPI.

Features

• 3-Phase Pre-Drivers for N-Channel MOS Field-Effect Transistors (MOSFETs)

• Pulse-Width Modulation (PWM) Frequency up to 20 kHz

• Fault Diagnostics

• Charge Pump

• Phase Comparators

• Microcontroller (MCU) Reset Generator

• Serial Port I/F (SPI)

• Motor-Current Sense