Part Number : S25FL032P

Function : 32-Mbit CMOS 3.0 Volt Flash Memory with 104-MHz SPI Multi I/O Bus

Package : DIP, SOP 16 Pin type

Maker : Spansion Inc.

Pinouts :
S25FL032P datasheet

Description :

The S25FL032P is a 3.0 Volt (2.7V to 3.6V), single-power-supply Flash memory device. The device consists of 64 uniform 64 KB sectors with the two (Top or Bottom) 64 KB sectors furthersplit up into thirty-two 4KB sub sectors. The S25FL032P device is fully backward compatible with the S25FL032A device.

The device accepts data written to SI(Serial Input) and outputs data on SO (Serial Output). The devices are designed to be programmed in-system with the standard system 3.0-volt Vcc supply.

Block Diagram

The memory can be programmed 1 to 256 bytes at a time, using the Page Program command. The device supports Sector Erase and Bulk Erase commands.
Each device requires only a 3.0-volt power supply (2.7V to 3.6V) for both read and write functions. Internally generated and regulated voltages are provided for the program operations. This device requires a high voltage supply to the W#/ACC pin to enable the Accelerated Programming mode.

Datasheet PDF Download :
S25FL032P pdf

Others datasheet of same file : S25FL032, S25FL032P0XMFI001
2021/07/13 09:54 2021/07/13 09:54