Part Number : R3J1K5
Function : Through Hole 1.5K Ohm, Resistor
Maker : Ohmite Mfg. Co.
Image : 
Description :
Material Core: Ceramic.
Coating: Vitreous enamel except for values above 4.7K (3W) and 7.5K (5W), which are supplied in silicone-ceramic coatings.
Terminals: Solder coated radial. #20 ga. tinned terminals require 0.046 in. (1.168 mm) holes (2). RoHS solder composition is 96% Sn, 3.5% Ag, 0.5% Cu
Derating: Linearly from 100% @ +25°C to 0% @ +350°C.
Note: Values above 3.9K (3W) and 8.2K (5W) involve very fine resistance wire and should not be used in critical applications without burn-in and/or thermal cycling.
Features
• Radial construction for direct insertion into printed circuit boards; fit standard 0.10 inch
matrix boards with standard 0.046 inch diameter holes. Provides a built in stand-off to
reduce board temperature.
• Space saving radial terminals reduce the total length require ment compared to axial terminal resistors and increase packaging density possibilities.
• Flame resistant lead free vitreous enamel coating.
• RoHS compliant; add “E” suffix to part number to specify.
Datasheet PDF Download : 
Others datasheet of same file :
R3J100, R3J10K, R3J10R, R3J120, R3J150
