Part Number : AD5384
Function : 40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit denseDAC
Package : 100-ball CSP_BGA Type
Maker : Analog Devices
Pinouts : 
Description :
The AD5384 is a complete single-supply, 40-channel, 14-bitdigital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The device includes an internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip channel monitor function that multiplexes the analog outputs to a common MON_OUT pin for external monitoring, and an output amplifier boost mode that allows the amplifier slew rate to be optimized.
The IC contains a serial interface compatible with SPI,QSPI, MICROWIRE, and DSP interface standards withinterface speeds in excess of 30 MHz and an I2C-compatible interface supporting 400 kHz data transfer rate. An input register followed by a DAC register provides double buffering, allowing the DAC outputs to be updated independently or simultaneously, using the LDAC input. Each channel has a programmable gain and offset adjust register letting the user
fully calibrate any DAC channel. Power consumption is typically 0.25 mA per channel with boost mode off.
Features
1. Guaranteed monotonic
2. Relative accuracy (INL): ±4 LSB maximum
3. On-chip 1.25 V/2.5 V, 10 ppm/°C reference
4. Temperature range: −40°C to +85°C
5. Rail-to-rail output amplifier
Function :
1. Channel monitor
2. Simultaneous output update via LDAC
3. Clear function to user programmable code
4. Amplifier boost mode to optimize slew rate
5. User programmable offset and gain adjust
6. Toggle mode enables square wave generation
7. Thermal monitor
Applications
1. Variable optical attenuators (VOAs)
2. Level settings (automatic test equipment [ATE])
3. Optical micro-electromechanical systems (MEMS) control
Datasheet PDF Download : 
Others datasheet of same file :
AD5384BBCZ-5, AD5384BBCZ-5REEL7
