Part Number : SN75175N
Function : QUADRUPLE DIFFERENTIAL LINE RECEIVERS
Package : DIP, SO 16 Pin Tpe
Maker : Texas Instruments
The SN65175 and SN75175N are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.
The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.
1. Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
2. Common-Mode Input Voltage Range -12 V to 12 V
3. Input Sensitivity : ± 200 mV
4. Input Hysteresis : 50 mV Typ
5. High Input Impedance : 12 k Min
6. Low-Power Requirements
SN65175D, SN65175DE4, SN65175DG4, SN65175DR,