Posted       

Part Number : SN74ALVTH16827VR
Function : 2.5-V/3.3-V 20-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Maker : Texas Instruments

Pinouts :
SN74ALVTH16827VR datasheet

Description :

The ’ALVTH16827 devices are 20-bit buffers/line drivers designed for 2.5-V or 3.3-V VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.

The devices are composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1and 1OE2, or 2OE1and 2OE2) inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

 

When VCCis between 0 and 1.2 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.2 V, OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN54ALVTH16827 is characterized for operation over the full military temperature range of –55°C to
125°C. The SN74ALVTH16827 is characterized for operation from –40°C to 85°C.

 


Datasheet PDF Download :
SN74ALVTH16827VR pdf

Others datasheet of same file : 74ALVTH16827DLG4,74ALVTH16827DLRG4,74ALVTH16827GRE4,74ALVTH16827GRG4,74ALVTH16827VRE4
2015/01/28 13:52 2015/01/28 13:52

This Blog provides Datasheets and information for electronic components and semiconductors