Posted       

Part Number : SN74ACT245
Function : OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Maker : Texas Instruments

Pinouts :
SN74ACT245 datasheet

Description : 4.5-V to 5.5-V Vcc Operation
Inputs Accept Voltages to 5.5 V
Max Tpd of 8 ns at 5 V
Inputs Are TTL-Voltage Compatible

description/ordering information
These octal bus transceivers are designed for asynchronous two-way communication between data buses. The
control-function implementation minimizes external timing requirements.
When the output-enable (OE) is low, the device passes noninverted data from the A bus to the B bus or from
the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. A high onOEdisables
the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OEshould be tied to VCCthrough a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Datasheet PDF Download :
SN74ACT245 pdf

Others datasheet of same file : 5962-8766301M2A,5962-8766301MRA,5962-8766301MSA,5962-8766301SRA,5962-8766301SSA
2015/01/28 13:52 2015/01/28 13:52

This Blog provides Datasheets and information for electronic components and semiconductors