Posted       

Part Number : SE555

Function : PRECISION TIMERS - NA555, NE555, SA555, SE555

Maker : Texas Instruments

Pinouts :
SE555 datasheet

Description :

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.

The threshold and trigger levels normally are two-thirds and one-third, respectively, of Vcc. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low.

 

The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.


The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.

FEATURES
• Timing From Microseconds to Hours
• Astable or Monostable Operation
• Adjustable Duty Cycle
• TTL-Compatible Output Can Sink or Source up to 200 mA


Datasheet PDF Download :
SE555 pdf

Others datasheet of same file : JM38510/10901BPA, M38510/10901BPA, NA555, NA555D, NA555DG4
2015/08/27 14:42 2015/08/27 14:42

This Blog provides Datasheets and information for electronic components and semiconductors