Posted       

Part Number : MAX19713
Function : 10-Bit, 45Msps, Full-Duplex Analog Front-End
Maker : Maxim Integrated

Pinouts :
MAX19713 datasheet

Description :

General Description
The MAX19713 is an ultra-low-power, highly integrated mixed-signal analog front-end (AFE) ideal for wideband communication applications operating in full-duplex (FD)mode. Optimized for high dynamic performance and ultra-low power, the device integrates a dual 10-bit, 45Msps receive (Rx) ADC; dual 10-bit, 45Msps transmit(Tx) DAC; three fast-settling 12-bit aux-DAC channels for ancillary RF front-end control; and a 10-bit, 333ksps
housekeeping aux-ADC. The typical operating power in FD mode is 91.8mW at a 45MHz clock frequency. The Rx ADCs feature 54dB SINAD and 72.2dBc SFDR at 5.5MHz input frequency with a 45MHz clock frequency. The analog I/Q input amplifiers are fully differential and accept 1.024VP-Pfull-scale signals. Typical I/Q channel matching is ±0.03 phase and ±0.02dB gain.

Features
♦Dual 10-Bit, 45Msps Rx ADC and Dual 10-Bit,
45Msps Tx DAC
♦Ultra-Low Power
91.8mW at fCLK= 45MHz, FD Mode
79.2mW at fCLK= 45MHz, Slow Rx Mode
49.5mW at fCLK= 45MHz, Slow Tx Mode
Low-Current Standby and Shutdown Modes
♦Programmable Tx DAC Common-Mode DC Level
and I/Q Offset Trim
♦Excellent Dynamic Performance
SNR = 54.1dB at fIN = 5.5MHz (Rx ADC)
SFDR = 70.3dBc at fOUT= 2.2MHz (Tx DAC)
♦Three 12-Bit, 1µs Aux-DACs
♦10-Bit, 333ksps Aux-ADC with 4:1 Input Mux and
Data Averaging
♦Excellent Gain/Phase Match
±0.03° Phase, ±0.02dB Gain (Rx ADC) at
fIN = 5.5MHz
♦Multiplexed Parallel Digital I/O
♦Serial-Interface Control
♦Versatile Power-Control Circuits
Shutdown, Standby, Idle, Tx/Rx Disable
♦Miniature 56-Pin Thin QFN Package
(7mm x 7mm x 0.8mm)


Datasheet PDF Download :
MAX19713 pdf

Others datasheet of same file : MAX19713,MAX19713ETN,MAX19713ETN+
2015/01/28 13:52 2015/01/28 13:52

This Blog provides Datasheets and information for electronic components and semiconductors