Posted       

Part Number : MAX19710
Function : 10-Bit, 7.5Msps, Full-Duplex Analog Front-End
Maker : Maxim Integrated

Pinouts :
MAX19710 datasheet

Description :

General Description
The MAX19710 is an ultra-low-power, highly integrated mixed-signal analog front-end (AFE) ideal for wideband communication applications operating in full-duplex (FD)
mode. Optimized for high dynamic performance and ultra-low power, the device integrates a dual 10-bit, 7.5Msps receive (Rx) ADC; dual 10-bit, 7.5Msps transmit
(Tx) DAC; three fast-settling 12-bit aux-DAC channels for ancillary RF front-end control; and a 10-bit, 333ksps housekeeping aux-ADC. The typical operating power in FD mode is 30mW at a 7.5MHz clock frequency.The Rx ADCs feature 54.8dB SINAD and 79.8dBc SFDR
at 3.3MHz input frequency with a 7.5MHz clock frequency. The analog I/Q input amplifiers are fully differential and accept 1.024VP-Pfull-scale signals. Typical I/Q channel matching is ±0.01° phase and ±0.01dB gain.

Features
♦Dual 10-Bit, 7.5Msps Rx ADC and Dual 10-Bit,
7.5Msps Tx DAC
♦Ultra-Low Power
30mW at fCLK= 7.5MHz, FD Mode
21.3mW at fCLK= 7.5MHz, Slow Rx Mode
21.9mW at fCLK= 7.5MHz, Slow Tx Mode
Low-Current Standby and Shutdown Modes
♦Programmable Tx DAC Common-Mode DC Level
and I/Q Offset Trim
♦Excellent Dynamic Performance
SNR = 54.9dB at fIN = 3.3MHz (Rx ADC)
SFDR = 73.8dBc at fOUT= 620kHz (Tx DAC)
♦Three 12-Bit, 1μs Aux-DACs
♦10-Bit, 333ksps Aux-ADC with 4:1 Input Mux and
Data Averaging
♦Excellent Gain/Phase Match
±0.01° Phase, ±0.01dB Gain (Rx ADC) at
fIN = 1.8MHz
♦Multiplexed Parallel Digital I/O
♦Serial-Interface Control
♦Versatile Power-Control Circuits
Shutdown, Standby, Idle, Tx/Rx Disable
♦Miniature 56-Pin Thin QFN Package
(7mm x 7mm x 0.8mm)


Datasheet PDF Download :
MAX19710 pdf

Others datasheet of same file : MAX19710,MAX19710ETN,MAX19710ETN+
2015/01/28 13:52 2015/01/28 13:52

This Blog provides Datasheets and information for electronic components and semiconductors