Part Number : LM358AP
Function : DUAL OPERATIONAL AMPLIFIER
Maker : Texas Instruments
These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example, these devices can be operated directly from the standard 5-V supply used in digital systems and easily can provide the required interface electronics without additional ±5-V supplies.
Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2904)
Dual Supplies: ±1.5 V to ±16 V (±13 V for LM2904)
Low Supply-Current Drain, Independent of Supply Voltage:
0.7 mA Typ
Wide Unity Gain Bandwidth: 0.7MHz
Common-Mode Input Voltage Range Includes Ground,
Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters Input Offset Voltage: 3 mV Typ
A Versions: 2 mV Typ
Input Offset Current: 2 nA Typ
Input Bias Current: 20 nA Typ
A Versions: 15 nA Typ
Differential Input Voltage Range Equal to Maximum-Rated
Supply Voltage: 32 V (26 V for LM2904)
Open-Loop Differential Voltage Gain: 100dB Typ
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted.
On All Other Products, Production Processing Does
Not Necessarily Include Testing of All Parameters.
Datasheet PDF Download :
Others datasheet of same file :