Part Number : DAC081C081
Function : 8-Bit Micro Power Digital-to-Analog Converter with an I2C Compatible Interface
Package : WSON 6 Pin, SOT-23-6 Pin Type
Maker : Texas Instruments
The DAC081C081 is an 8-bit, single channel, voltage-output digital-to-analog converter (DAC) that operates from a +2.7V to 5.5V supply. The output amplifier allows rail-to-rail output swing and has an 4.5µsec settling time. The DAC081C081 uses the supply voltage as the reference to provide the widest dynamic output range and typically consumes 132µA while operating at 5.0V. It is available in 6-lead SOT and WSON packages and provides three addressoptions (pin selectable).
As an alternative, the DAC081C085 provides nine I2C addressing options and uses an external reference.
It has the same performance and settling time as the DAC081C081. It is available in an 8-lead VSSOP. The DAC081C081 and DAC081C085 use a 2-wire, I2C-compatible serial interface that operates in all three speed modes, including high speed mode(3.4MHz). An external address selection pin allows up to three DAC081C081 or nine DAC081C085 devices per 2-wire bus. Pin compatible alternatives to the DAC081C081 are available that provide additional address options. The DAC081C081 and DAC081C085 each have a 16-bit register that controls the mode of operation, the power-down condition, and the output voltage. A power-on reset circuit ensures that the DAC output powers up to zero volts. A power-down feature reduces power consumption to less than a microWatt. Their low power consumption and small packages make these DACs an excellent choice for use in battery operated equipment. Each DAC operates over the extended industrial temperature range of −40°C to +125°C.
• Ensured Monotonicity to 8-bits
• Low Power Operation: 156 µA Max @ 3.3V
• Extended Power Supply Range (+2.7V to +5.5V)
• Rail-to-Rail Voltage Output
• Very Small Package
Official Homepage : https://www.ti.com/product/DAC081C081
Datasheet PDF Download :
Others datasheet of same file :