Function : Microcontroller with 128K bytes In-system programmable flash, 16 MHz, (0 - 8MHz ATmega128L, 0 - 16MHz ATmega128)
Maker : Atmel Corporation
• High-performance, Low-power Atmel AVR 8-bit Microcontroller
• Advanced RISC Architecture.
• High Endurance Non-volatile Memory segments
The ATmega128 provides the following features: 128Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 4Kbytes EEPROM, 4Kbytes SRAM, 53 general purpose I/O lines, 32 general purpose working registers, Real Time Counter (RTC), four flexible Timer/Counters with compare modes and PWM, 2 USARTs, a byte oriented Two-wire Serial Interface, an 8-channel, 10-bit ADC with optional differential input stage with programmable gain, programmable Watchdog Timer with Internal Oscillator, an SPI serial port, IEEE std. 1149.1 compliant JTAG test interface, also used for accessing the On-chip Debug system and programming and six software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or Hardware Reset. In Power-save mode, the asynchronous timer continues to run, allowing the user to maintain a timer base while the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except Asynchronous Timer and ADC, to minimize switching noise during ADC conversions. In Standby mode, the Crystal/Resonator Oscillator is running while the rest of the device is sleeping. This allows very fast start-up combined with low power consumption. In Extended Standby mode, both the main Oscillator and the Asynchronous Timer continue to run.
http://www.atmel.com/Images/doc2467.pdf (Full Version)
Datasheet PDF Download :
Others datasheet of same file : ATmega128,ATMEGA128-16AC,ATMEGA128-16AI,ATmega128-16AU,ATmega128-16AUR