Part Number : AD8319

Function : 1 MHz to 10 GHz, 45 dB, Log Detector/Controller

Package : 8 Pin Small footprint: 2 mm × 3 mm LFCSP

Maker : Analog Devices

Pinouts :
AD8319 datasheet

Description :

The AD8319 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output. It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell. The device can be used in either measurement or controller modes. The IC maintains accurate log conformance for signals of 1 MHz to 8 GHz and provides useful operation to 10 GHz. The input dynamic range is typically 45 dB (re: 50 Ω) with error less than ±3 dB. The AD8319 has 6 ns/10 ns (fall time/rise time) response time that enables RF burst detection to a pulse rate of beyond 50 MHz. The device provides unprecedented logarithmic intercept stability vs. ambient temperature conditions. A supply of 3.0 V to 5.5 V is required to power the device. Current consumption is typically 22 mA, and it decreases to 200 µA when the device is disabled.


1. Wide bandwidth: 1 MHz to 10 GHz
2. High accuracy: ±1.0 dB over temperature
3. 45 dB dynamic range up to 8 GHz
4. Stability over temperature: ±0.5 dB
5. Low noise measurement/controller output VOUT
6. Pulse response time (fall/rise): 6 ns/10 ns
7. Supply operation: 3.0 V to 5.5 V @ 22 mA
8. Fabricated using high speed SiGe process

Applicatiosn : 

1. RF transmitter PA setpoint controls and level monitoring
2. Power monitoring in radiolink transmitters
3. RSSI measurement in base stations, WLANs, WiMAX, and radars

Datasheet PDF Download :
AD8319 pdf

Others datasheet of same file :

AD-8319, AD8319-EVALZ, AD8319ACPZ-R2,


2021/05/20 14:40 2021/05/20 14:40