Posted       

Part Number : 93LC56AT
Function : 2K Microwire Compatible Serial EEPROM
Maker : Microchip Technology

Pinouts :
93LC56AT datasheet

Description :

When the ORG pin (93XX56C) pin is connected to VCC, the (x16) organization is selected. When it is
connected to ground, the (x8) organization is selected.

Instructions, addresses and write data are clocked into the DI pin on the rising edge of the clock (CLK). The DO pin is normally held in a High-Z state except when reading data from the device, or when checking the Ready/ Busystatus during a programming operation.

The Ready/Busystatus can be verified during an Erase/Write operation by polling the DO pin; DO low indicates that programming is still in progress, while DO high indicates the device is ready. DO will enter the High-Z state on the falling edge of CS.


Datasheet PDF Download :
93LC56AT pdf

Others datasheet of same file : 93AA56A,93AA56B,93AA56C,93AA56P,93AA56SN
2015/01/28 13:52 2015/01/28 13:52

This Blog provides Datasheets and information for electronic components and semiconductors